controller

operation mode		: normal		-->	fast response
autorotation		: off
acceleration 0-100% 	: 1,0s
brake mode		: soft 30/100/1,5s
init. point type	: auto			-->	fixed
initial point		: 1,10 ms
end point		: 1,90 ms
autoinc. endpoint	: from 1,90 ms		-->	fixed end point 1,90 ms

limits

accumulator type	: Li-Ion/Pol/Fe
number of cells		: Li-xx auto
Li-xx cutoff V per cell	: 3,2
off voltage set		: 20,2 V			(result of cell count and cutoff per cell)
alarm voltage		: 5,0 V
temp protection		: 100 °C
max bat. capac.		: no limit
capacity alarm		: 40000mAh
max bat. current	: 170 A
cutoff type		: slow down

motor

rotation dir		: right			-->	left
PWM frequency		: 8 kHz
start power		: auto + 0%
timing			: 15°			-->	auto
motor poles		: 14			-->	10	(poles set to 2 in JLog for correct logging and telemetry values)
rotor gear		: 1: 1,0		-->	1: 10	(gear ratio set in JLog for correct logging and telemetry values)

SBEC settings

SBEC voltage		: 5,5V			-->	8,0V


From the JLog site:

Bitte beachten, dass JLog davon ausgeht,
dass der MEZON die Drehzahl unbehandelt liefert,
2-pol-normalisiert, weder Polzahl noch Untersetzung
(Ratio) im Setup des MEZON angewendet!